Customized Products

AQBot CH4 Monitor-(Single Point Continuous Methane Monitor)

Enquire Now

Envmart Warranty

Warranty

As per Oizom

100% Original

Products

Secure

Payments

100% Buyer

Protection

Specifications
KEY FEATURES

Processor

Quad-Core ARM Cortex A-72

Memory

2GB RAM, 8GB eMMC ROM

Internal Data Storage

Up to 12 months

Device Interface

On-device software, API, Display

Display Specification

6 digit 7 Segment Display

Gas sample mode

Natural diffusion

Warm up time

1 hour (cold start) for gas monitoring

Response Time (T90)

< 60 Seconds

Signal refresh rate

5 Seconds

Accuracy

<5%FS (at 205C/ 5020%RH)

Sensor life

2 years

Wireless Communications

Global 2G/3G/4G, LoRa, LTE, NB-IoT, Sigfox, Wifi (Any one)

Wired Communications

Ethernet, MODBUS TCP, MODBUS RTU, RS-485, CANbus (Any one)

Analog Output

1 x 4~20mA Current Loop with 12-bit Resolution

Relay Outputs

2 programmable relays, volt free relay contacts (1NO, 1 NC)

Beacon/sounder

Built-in, RED flashing light with alarm sounder 95db @ 1m

Power Supply

AC: 90VAC- 265VAC 50/60Hz

Power consumption

3.5 W (average)

Wiring connections

Pre-wired supplied with 2m cable

On Device Display: Built-in display module to check on-site concentration

Ultimate Durability: NEMA Certified industrial-grade enclosure made of high-grade engineering composite polymers

Weatherproof: IP65 grade enclosure for endurance against harsh environmental conditions

Accurate measurement: Accurate CH4 gas measurement with NDIR technology

Compact: Light-weight and the compact system can be easily installed on any wall, pole, or structure

Real-Time Data: Continuous monitoring and real-time data transfer at configurable intervals

Built-in Relay: Built-in relay for better process automation

Wired Communications: Supports all industry-standard output signals like Modbus, Canbus, RS-485, RS-283

Wireless Communications: Supports a wide range of wireless connectivity options like GSM / WiFi / LoRa / NBIoT

Over-The-Air Update: Automatically upgradeable from a central server without any onsite visit (available for wireless connectivity)

Product Description

The AQBot CH4 is a robust CH4 Gas Monitor that can measure methane levels in the air. This CH4 gas detector uses NDIR technology to measure CH4 concentration in the air. The industrial methane monitor is equipped with a nondispersive infrared absorption (NDIR) sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh weather.

The AQBot enclosure is NEMA 4X approved to last long in harsh industrial environments. It comes with an on-device display to check CH4 concentration without being dependent on any external display. This fixed methane gas detector comes with an optional on-device alarm siren and strobe-light for quick action in case of any atmospheric hazard. It provides an early warning to potential toxic gas exposure.

The AQBot CH4 monitor can accurately monitor CH4 gas concentrations in real-time. This industrial air quality monitor can integrate relevant CH4 sensor modules as per the application requirement.

This industrial methane monitor is lightweight and easy to install on the wall or pole with versatile mounting arrangements. It can easily integrate with existing building monitoring or plant control systems infrastructure.
The NDIR CH4 sensor module is easy to replace or calibrate by sending the device back to Oizom or our partner facility.

The single-point continuous gas monitoring system AQBOT can communicate over multiple communication protocols. Multiple CH4 monitor networks can receive output signals to a central point after configuration. Also, it has a built-in relay module, through which the user can set up a relevant threshold to trigger the Alarming system. Thresholds for the alarm are customizable from the Air Quality Software, which comes with AQBot CH4 monitor.

ID-OZCH4_1

PARAMETER- METHANE (CH4)

RANGE- 500-1500 PPM

RESOLUTION- 1 PPM