Product Description
Inert gas suppression systems use argon and nitrogen gases and their mixtures as extinguishing agents and are based on the principle of reducing the oxygen concentration inside the protected hazard. The oxygen concentration is minimized by the application of inert gas until it reaches a level where combustion is no longer supported. Each system is designed to decrease oxygen to a specific level. When discharged, inert gas is quickly and uniformly distributed within the enclosure, achieving design concentration in 60 seconds.
Argon and nitrogen it is naturally present in the atmosphere, therefore their greenhouse effect is nil and their ozone layer depletion potential is zero. It is chemically inert, non-conductive, colorless, odorless, and flavorless. inert gas is non-corrosive and may be used at normal temperatures with such materials as nickel, steel, stainless steel, copper, brass, bronze, and plastics.
These gases will never be re-classified as “hazardous waste” nor require special inspection procedures under the EU’s “F” Gas Regulations.
Inert gas fire suppression systems are the safe, natural way to extinguish a fire. Because of its unique patented valve assembly, an inert gas agent enters the protected room within the industry required 60 seconds but at a steady flow rate — preventing destructive turbulence from occurring.