Customized Products

Hanna | HI99192 | Drinking Water pH Portable Meter

Enquire Now

Envmart Warranty

Warranty

As per Hanna

100 % Original

Product

100 % Secure

Payment

100 %

Protected

Specifications
KEY FEATURES

Brand

Hanna

Product Name

Drinking Water pH Portable Meter

pH Range

-2.00 to 16.00 pH; -2.0 to 16.0 pH

pH Resolution

0.01 pH; 0.1 pH

pH Accuracy

0.02 pH; 0.1 pH

pH Calibration

automatic, at one or two points with two sets of buffers (standard 4.01, 7.01,10.01 or NIST 4.01, 6.86, 9.18)

pH Temperature Compensation

automatic -5.0 to 105.0 C/23.0 to 221.0 F

pH CAL Check (electrode diagnostics)

probe condition indicator

pH Sensor Check

yes

mV Range

825 mV (pH-mV)

mV Resolution

1 mV (pH-mV)

mV Accuracy

1 mV (pH-mV)

Temperature Range

-5.0 to 105.0C / 23.0 to 221.0F

Temperature Resolution

0.1C / 0.1F

Temperature Accuracy

0.5C (up to 60C); 1.0C (outside) / 1F (up to 140F); 2.0F (outside)

pH Electrode

FC2153 pre-amplified pH electrode with internal temperature sensor, DIN connector, 1 m (3.3) cable

Automatic Shut-Off

user selectable

Battery Type/Life

1.5V (3) AAA / approximately 1400 hours of continuous use

IP Protection

IP67

Environment

0 to 50C (32 to 122F); RH max 100%

Dimensions

154 x 63 x 30 mm (6.1 x 2.5 x 1.2)

Weight

196 g (6.91 oz.)

Ordering Information

HI99192 is supplied with FC2153 pH/temperature probe, HI70004 pH 4.01 buffer solution sachet (20 mL x 1), HI70007 pH 7.01 buffer solution sachet (20 mL x 1), HI700601 electrode cleaning solution sachets (2 x 20 mL),100 ml beaker, batteries, calibration certificates for both meter and probe, instruction manual, and rugged thermoformed carrying case.

Waterproof - The HI99192 is a waterproof meter rated IP67 for immersion in up to one meter of water for 30 minutes.

Automatic Calibration - One or two-point calibration is automatic to two selectable buffer sets.

Automatic Temperature Compensation – An integrated temperature sensor allows for automatic temperature compensation of pH measurements.

Sensor Check - Using the pH-mV range the user can check the sensor status by reading the mV reading in fresh buffers. At room temperature (25 oC/77oF) the reading should be +/- 30 mV in pH 7.01 and greater than 150 mV difference between pH 7.01 and 4.01.

Multi-Level LCD Display - The split-level LCD displays both pH and temperature readings, along with indicators for reading stability, battery percentage, and probe condition.

Probe Condition Indicator - The probe condition indicator is based on the offset and slope characteristic of the electrode. There are 5 bars ranging from all 5 indicating the probe is in excellent condition and 1 bar indicating the probe should be cleaned or replaced.

Battery Error Prevention System - The meter will automatically shut off if there isnt enough power to obtain an accurate measurement.

Battery Life Indicator - The battery percent level is displayed at start up alerting the user to the remaining battery power that is available.

Product Description

The Hanna Instruments HI99192 is a durable, waterproof, and portable pH and temperature meter designed specifically for the measurement of drinking water. Automatic calibration is performed at one or two points with two sets of buffers. All calibration and measurement readings are automatically compensated for temperature variations.The HI99192 uses the FC2153 glass body, amplified pH electrode that offers numerous features that improve pH testing of drinking water. The split-level LCD displays both pH and temperature readings, along with indicators for reading stability, battery percentage, and calibration instructions.