Customized Products

Ammonia Gas Leak Detector

Enquire Now

Envmart Warranty

Warranty

As per Pyrotron

100% Original

Products

Secure

Payments

100% Buyer

Protection

Specifications
KEY FEATURES

Display Type

Digital

Model Number/Name

EG 500 D

Material

Stainless steel

Application

Kitchen, store room, pine line

Transmition Output

4-20 mA

Channel System

A 4-Channel

Ammonia Sensor ranges

0-50 ppm, 0-100 ppm and 0-300 ppm can be supplied

Power Supply

24 VDC

Compliance with these issues is simplified by using a Sensidyne Controller to process the gas sensor inputs, provide annunciation and supervisory control.

Integrating a Process and Personnel protection gas detection system requires that the notification and control procedures mandated by Code and Law be followed, including Insurance Company mandates.

Sample draw hardware can be used for high temperature areas.

Advanced organic Ammonia sensors, function over a range of –4° to 122° F (–20° to 50°C), but may fail in high humidity and high temperature. Heat shields are used to protect the sensor-transmitters from radiant heat off the flue work.

Electro-chemical sensors have temperature limitations, which should be observed, or useful life will be compromised.

A special calibration adapter is supplied for the remote sensor option, so that calibration functions can be performed from the transmitter location.

Product Description

Ammonia Gas Leak Detector Some users prefer to use a few 0-500 ppm sensors, as levels at or above the IDLH (300 ppm) will be indicated, and appropriate clothing and respirators can be selected by the emergency response team.An LEL sensor is often used in enclosed areas where there may be potential for a large Ammonia release and concentrations approaching the LEL (15%).Mounting configurations for the gas sensors include placing the sensor remote from the transmitter, or drawing a sample from a remote or inaccessible location.The latter must include a flow switch to indicate sample system integrity.A special calibration adapter is supplied for the remote sensor option, so that calibration functions can be performed from the transmitter location.Electro-chemical sensors have temperature limitations, which should be observed, or useful life will be compromised.Advanced organic Ammonia sensors, function over a range of –4° to 122° F (–20° to 50°C), but may fail in high humidity and high temperature. Heat shields are used to protect the sensor-transmitters from radiant heat off the flue work.