Ready to Ship

HIOKI CM-4373-50 + P2000 Probe Clamp Meter for Solar Industries (Up to 2000V DC measurement)

Update Qty:

Qty Per Pack : 1 Min Orderable Qty : 1

Add to cart Buy Now

Check serviceability at your Pincode:

Shipping charge applicable as per serviceability

Envmart Warranty

Warranty

As per HIOKI

100% Original

Products

Secure

Payments

100% Buyer

Protection

Specifications
KEY FEATURES

Accuracy

0.3A

Brand

Hioki

Model Name/Number

CM-4373-50 + P2000

Ranges From

600A

Current

2000A AC/DC

Volt

2000V DC

DC Resistance

6M Ohms

DC Current range

600.0 A/2000 A, Basic accuracy: 1.3% rdg. 0.3 A (600 A range)

AC Current range

600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: 1.3% rdg. 0.3 A (at 600 A)

Crest factor

600.0 A range: 3 or less 2000 A range: 2.84 or less

DC+AC Current range

600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: 1.3% rdg. 1.3 A (at 600 A)

DC Voltage range

600.0V to 1000 V (When using P2000: 600.0 V to 2000 V)

AC Voltage range

6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: 0.9% rdg. 0.003 V (at 6 V)

DC+AC Voltage range

6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 - 66 Hz: 1.0% rdg. 0.013 V (at 6 V)

Resistance range

600.0 O to 6.000 MO, 5 ranges, Basic accuracy: 0.7% rdg. 0.5 O (at 600 O)

Capacitance range

1.000 F to 1000 F, 4 ranges, Basic accuracy: 1.9% rdg. 0.005 F (at 1 F)

Frequency range

9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: 0.1% rdg. 0.003 Hz (at 9.999 Hz)

Temperature (K)

-40.0 to 400.0C, add temperature probe accuracy to basic accuracy of 0.5% rdg. 3.0C

Voltage detection

Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz

Harmonic levels

[With Z3210 installed] Voltage/Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio Harmonics can be displayed with our free app GENNECT Cross.

Other functions

DC power, Continuity check, Diode check, Automatic AC/DC detection, Pass/fail judgement function of DC A and DC V, Max/Min/Average/PEAK MAX/ PEAK MIN value display, Low-pass filter function, Display value hold, Auto hold, Back light, Auto-power save, Buzzer sounds, Zero-adjustment, etc.

Dustproof, waterproof

IP54 (While in storage, or when measuring the current an insulated conductor. Do not use when wet.)

Power supply

LR03 Alkaline battery 2 Continuous use: 40 hr (without Z3210 installed), 24 hr. (with Z3210 installed and using wireless communications) Other conditions: 100 A AC measurement, backlight off, 23C reference value

Core jaw diameter

f55 mm (2.17 in), Jaw dimension: 92 mm (3.62 in) W18 mm (0.71 in) D

Included accessories

Test Lead L9300, Carrying Case C0203, LR03 Alkaline battery 2, Instruction Manual2, Operating Precautions 1

Dimensions and mass

65 mm (2.56 in) W250 mm (9.84 in) H35 mm (1.38 in) D mm, 530 g (18.7 oz)

Enables high voltage measurement up to CAT III 2000 V

Safely measure solar installations like the mega-solar without interrupting the grid by simply connecting the DC High Voltage Probe P2000 to compatible Hioki clamp meters and digital multimeters (DMMs)

Product Description

HIOKI CM-4373-50 + P2000 Probe Clamp Meter for Solar Industries (Up to 2000V DC measurement), Clamp probes are used with some meters to measure electrical power and energy. The clamp measures the current and other circuitry the voltage; the true power is the product of the instantaneous voltage and current integrated over a cycle