Ready to Ship

Digital Input & Digital Output DIDO 24

Update Qty:

Qty Per Pack : 1 Min Orderable Qty : 1

Add to cart Buy Now

Check serviceability at your Pincode:

Shipping charge applicable as per serviceability

Envmart Warranty

Warranty

As per SCAN

100% Original

Products

Secure

Payments

100% Buyer

Protection

Specifications
KEY FEATURES

No. of Inputs

Types of Input

Potential free input or 24VDC level input

No. of Outputs

Type of Output

Open Collector o/p. Optional relay o/p through external relay card.

Input Isolation in Volt

1 KVDC

Indications

3mm LED indications for power ON, System OK, Tx, Rx & all input(16 nos.) & output status.(8 nos.)

Excitation Supply

External 24VDC Required

Communication port

RS485 2 wire, Modbus RTU Protocol

Baudrate, Databits, Parity

Baud rate = 9600/19200 BPS -> Settable at power ON from 4 way DIP switch.By default setting ->Data bits = 8, Stop bit = 1, Parity- none.Station ID 1 TO 8 Settable from DIP switch on-line.

Max. polling frequency

MODBUS polling time - 10ms

Supply voltage

230 VAC 10%, 1ph, 50 Hz

Enclosure

DIN rail mount, ABS moulded , 32 terminal box Size : 70 x 150 x 114 mm ( H x W x D )

Operating conditions

Operating Temperature 5 to 55degreeC ambient

Storage conditions

Storage Temperature -10 to 70 degreeC ambient.

Ruggedised, State-of-the-art Micro-controller based system.

Ideal for SCADA Applications.

Optical isolation for input / output

Serial communication on RS485 with MODBUS RTU protocol.

24VDC @ 100mA supply provided for external excitation.

Standard DIN rail mounting ABS moulded cabinet.

Product Description

Falcon DIDO24, Digital Input/output module with RS485 Connectivity Which Is Best Suitable For SCADA. This Module Can Also Be Used As a Slave Module With PLC.

Digital Inputs are Optically isolated inputs and accept potential free contact signals. These modules can be Used For Sensing Level Switches, Proximity Switches, Door Switches, Alarm/Trip Conditions In the Panel, Pump/motor status, equipment status, etc.

Digital Outputs are optically isolated open collector outputs to drive the external relay modules. These outputs can be used to perform supervisory control actions like giving alarms, operating valves, switching ON/OFF pumps/motors, etc.

These modules use MODBUS RTU protocol for serial communication. RS485 serial port is provided to make the modules suitable for multi-dropping applications.

DIP switch is provided for ID and baud rate settings used for serial communication. There are 4 LED indications for system OK, Power, and Serial communication status which helps for correct diagnostics of the Operations.

24VDC @ 100mA Supply Is Provided In The Module For external Excitation.

DIN Rail mounting makes it easy to be fitted into the panel.

The module operates on a 230VAC supply.