Ready to Ship

Digital Process Indicator DPC965

Update Qty:

Qty Per Pack : 1 Min Orderable Qty : 1

Add to cart Buy Now

Check serviceability at your Pincode:

Shipping charge applicable as per serviceability

Envmart Warranty

Warranty

As per SCAN

100% Original

Products

Secure

Payments

100% Buyer

Protection

Specifications
KEY FEATURES

Input

4- 20 mA DC linear / 0 - 10VDC / RTD Pt100 3 wire

Display

7 segment LED, 5 digit process value. Display Size = 1/2 inch

Keyboard

4 key tack-tile keyboard

Scaling (mA or Volt input)

Process value is scalable by software with Decimal point selection. For RTD Pt100 scaling factory set.

Accuracy

0.3 % of FSR 1 LSD

Relay Outputs Optional

2 / 4 relay outputs, contact rating 230VAC, 1Amp operating on 2 / 4 set-points with settable hysterisis.

Resolution

4 1/2 Digit. 0.1C resolution for RTD.

Supply

230VAC / 110VAC , 10 %, single phase, 50 Hz

Indications

3 mm LED indication for Relay and serial operation

Re-transmission (Optional)

4-20 mA true Retransmission Output for remote indicator or PLC. This feature is available only for 4-20mA input.

Transmitter Power Supply

24 VDC,100 mA power supply is made available for the external transmitter, for 4-20mA input type only.

Data Storage

All settings are stored in a battery backed RAM.

Serial Communication Optional

On line PC connectivity through SERIAL port RS485 on MODBUS protocol.

Connections

On Screw type connectors

Cabinet

Panel mounting ABS enclosure Size -- 96 x 96 x 120 mm ( H x W x D ) Cutout -- 92 x 92 mm

Ruggedised, State-of-the-art Micro-controller based system.

4 1/2 Digit, 1/2 inch LED display.

Signal Re-transmission.

Settable Hysteresis for two/ four relays.

User configurable span.

Serial Communication on RS 485 with Modbus RTU protocol.

Ideal for SCADA applications.

Flameproof enclosure - Optional.

Product Description

DPC 965M is intended to be used for indication and control application. 7-segment RED LED display makes it visible from a long distance. 4 1/2 digit resolution gives accuracy as high as ± 0.3 % ± 1 LSD. The unit accepts 4 - 20 mADC linear input, the most commonly used signal in the process industry, or 0 to 10VDC or RTD Pt100. In case of other inputs, we can provide appropriate converters.

Optional

Two/ four relays operate on separate set points and hysteresis is settable.
Serial port RS 485 with MODBUS RTU protocol gives the user facility to connect the unit on all standard SCADA and DCS.
4-20mA Retransmission output for remote display or PLC can be provided for 4-20mA input type